Civil Engineering Mcqs

For a continuous floor slab supported on beams, the ratio of end span length and intermediate span length, is____________________?

(A) 0.6
(B) 0.7
(C) 0.8
(D) 0.9

Submitted By :Ali Uppal

The diameter of transverse reinforcement of columns should be equal to one-fourth of the diameter of the main steel rods but not less than________________?

(A) 4 mm
(B) 5 mm
(C) 6 mm
(D) 7 mm

Submitted By :Ali Uppal

If Ac, Asc and A are areas of concrete, longitudinal steel and section of a R.C.C. column and m and c are the modular ratio and maximum stress in the configuration of concrete, the strength of column is______________?

(A) cAc + m cAsc
(B) c(A – Asc) + m cAsc
(C) c[A + (m – 1)ASC]
(D) All the above

Submitted By :Ali Uppal

If longitudinally spanning stairs are casted along with their landings, the maximum bending moment per metre width, is taken as___________________?

(A) wl²/4
(B) wl²/8
(C) wl²/10
(D) wl²/12

Submitted By :Ali Uppal

On an absolutely rigid foundation base, the pressure will________________?

(A) Be more at the edges of the foundation
(B) Be uniform
(C) Not be uniform
(D) Be zero at the centre of the foundation

Submitted By :Ali Uppal

The live load to be considered for an accessible roof, is________________?

(A) Nil
(B) 75 kg/m3
(C) 150 kg/m 2
(D) 200 kg/cm 2

Submitted By :Ali Uppal

According to I.S.: 456, 1978 the thickness of reinforced concrete footing on piles at its edges, is kept less than______________?

(A) 5 cm
(B) 10 cm
(C) 15 cm
(D) 20 cm

Submitted By :Ali Uppal

The stresses developed in concrete and steel in reinforced concrete beam 25 cm width and 70 cm effective depth, are 62.5 kg/cm2 and 250 kg/cm 2 respectively. If m = 15, the depth of its neutral axis is_______________?

(A) 20 cm
(B) 25 cm
(C) 30 cm
(D) 35 cm

Submitted By :Ali Uppal

is the pre-stressed force applied to the tendon of a rectangular pre-stressed beam whose area of cross section is and sectional modulus is . The maximum stress in the beam, subjected to a maximum bending moment , is_________________?

(A) f = (P/A) + (Z/M)
(B) f = (A/P) + (M/Z)
(C) f = (P/A) + (M/Z)
(D) f = (P/A) + (M/6Z)

Submitted By :Ali Uppal

For the design of a simply supported T-beam the ratio of the effective span to the overall depth of the beam is limited to______________?

(A) 10
(B) 15
(C) 25
(D) 20

Submitted By :Ali Uppal

Previous
First
....
266
267
268
269
270
....
281
Next