Civil Engineering Mcqs

The major principal stress in an element of cohesionless soil within the backfill of a retaining wall is________________?

(A) vertical if the soil is in an active state of plastic equilibrium
(B) vertical if the soil is in a passive state of plastic equilibrium
(C) inclined at 45° to the vertical plane
(D) none of the above

Submitted By :Ali Uppal

Rankine’s theory of earth pressure assumes that the back of the wall is_______________?

(A) plane and smooth
(B) plane and rough
(C) vertical and smooth
(D) vertical and rough

Submitted By :Ali Uppal

The angle that Coulomb’s failure envelope makes with the horizontal is called________________?

(A) cohesion
(B) angle of internal friction
(C) angle of repose
(D) none of the above

Submitted By :Ali Uppal

In the triaxial compression test, the application of additional axial stress (i.e. deviator stress) on the soil specimen produces shear stress on__________________?

(A) horizontal plane only
(B) vertical plane only
(C) both horizontal and vertical planes
(D) all planes except horizontal and vertical planes

Submitted By :Ali Uppal

During the first stage of triaxial test when the cell pressure is increased from 0.10 N/mm2 to 0.26 N/mm2, the pore water pressure increases from 0.07 N/mm2 to 0.15 “N/mm2. Skempton’s pore pressure parameter B is___________________?

(A) 0.5
(B) -0.5
(C) 2.0
(D) – 2.0

Submitted By :Ali Uppal

The coefficient of active earth pressure for a loose sand having an angle of internal friction of 30° is___________________?

(A) 1/3
(B) 3
(C) 1
(D) 1/2

Submitted By :Ali Uppal

Sensitivity of a soil can be defined as___________________?

(A) percentage of volume change of soil under saturated condition
(B) ratio of compressive strength of unconfined undisturbed soil to that of soil in a remoulded state
(C) ratio of volume of voids to volume of solids
(D) none of the above

Submitted By :Ali Uppal

In a triaxial compression test when drainage is allowed during the first stage (i. e. application of cell pressure) only and not during the second stage (i.e. application of deviator stress at constant cell pressure), the test is known as__________________?

(A) consolidated drained test
(B) consolidated undrained test
(C) unconsolidated drained test
(D) unconsolidated undrained test

Submitted By :Ali Uppal

If the shearing stress is zero on two planes, then the angle between the two planes is________________?

(A) 45°
(B) 90°
(C) 135°
(D) 225°

Submitted By :Ali Uppal

If a cohesive soil specimen is subjected to a vertical compressive load, the inclination of the cracks to the horizontal is__________________?

(A) 90°
(B) 45°
(C) 22.5°
(D) 0°

Submitted By :Ali Uppal

Previous
First
....
255
256
257
258
259
....
281
Next